VOLVO
ECM-P061C47 - Internal Control Module Engine RPM Performance. System Internal Failures. Watchdog / safety µC failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
Although the fault code is named as a safety fault in the processor, the condition is that the engine control module's internal monitoring has registered faulty speed monitoring. The causes are mainly the impulse sensor and the camshaft sensor with their wiring, or the control module itself. Engine output may be limited while the fault is active.
Mögliche Ursachen
- Poor contact (raised contact resistance) or a break in the wiring to the impulse sensor
- Raised contact resistance or a break in the wiring to the camshaft sensor
- Damaged impulse sensor or damaged camshaft sensor
- Internal fault or damage in the engine control module (ECM)
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition on, check the connectors at the impulse sensor and the camshaft sensor for contact resistance and oxidation
- 3Look for chafed or broken wiring to the impulse sensor and the camshaft sensor
- 4After the repair: read the diagnostic status and fault status with a diagnostic tool. The fault should be gone once the diagnosis is complete
- 5If the fault remains: have a workshop read the engine control module with diagnostic equipment
Symptome, die Sie bemerken können4
- The engine lacks power
- The engine hesitates, surges or runs jerkily, sometimes or all the time
- The check engine lamp lights or behaves abnormally
- Text message and warning symbol in the display
Was der Fehler beeinflussen kann1
- Engine output is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.