VOLVO
ECM-P061E00 - Internal Control Module Brake Signal Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S80 (2007–)2007Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008–2009Nur Motor: D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2010Nur Motor: D4204T
- Volvo V70 (2008–)2008–2009Nur Motor: D4204T, D5244T4, D5244T5
- Volvo V70 (2008–)2010Nur Motor: D4204T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module receives information from the forward sensing module (FSM) over the CAN network, and the FSM asks for engine braking when needed. The fault is set when such a request stays active longer than allowed, or when communication with the brake control module (BCM) is disturbed or missing. The code can only be cleared once the root fault has been remedied.
Mögliche Ursachen
- Contact resistance, oxidation or open circuit in connections
- Fault in the controller area network (CAN)
- Damaged forward sensing module (FSM)
- Open circuit in one of the CAN wires, or a short circuit between the CAN wires
- Fault in the brake control module (BCM)
Was Sie tun können
- 1With the ignition on, you can read the diagnostic status and fault status and see whether the fault is still present
- 2Use a multimeter to check that the CAN wires have no break and are not short-circuited to each other
- 3Check the connectors at the forward sensing module (FSM) and in the CAN connectors for looseness and oxidation
- 4Fault tracing in the brake control module (BCM) should be done by a workshop. Do not work on the braking system's control module yourself
- 5Remedy the root fault first and then clear the code, since it cannot be cleared until the root fault is remedied
Symptome, die Sie bemerken können1
- The cruise control will not engage
Was der Fehler beeinflussen kann1
- The cruise control switches off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.