Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P061E64
    VOLVO

    ECM-P061E64 - Internal Control Module Brake Signal Performance. Algorithm Based Failures. Signal plausibility failure

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (6)
    • Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
    • Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
    • Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
    • Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5

    Was bedeutet der Fehlercode?

    The engine control module receives information from the brake control module (BCM) over the CAN network, including about the brake light switch. The fault is set if a message concerning the brake light switch does not arrive or has the wrong content. The code therefore concerns communication between the control modules, and the cause may lie in the brake control module.

    Mögliche Ursachen

    • Contact resistance, oxidation or open circuit in connections
    • Fault in the controller area network (CAN)
    • Fault in the brake control module (BCM)

    Was Sie tun können

    1. 1Check that the fuses are intact
    2. 2Check that the brake lights come on when the brake pedal is pressed, since the engine control module receives information about the brake light switch
    3. 3With the ignition on: read the diagnostic status and fault status and check whether the fault is still active
    4. 4Check the connections in the CAN network for looseness and oxidation
    5. 5The fault may lie in the brake control module (BCM). Have a workshop trace it, since it controls the braking system, and do not work on it yourself

    Symptome, die Sie bemerken können1

    • The cruise control will not engage

    Was der Fehler beeinflussen kann1

    • The cruise control is switched off while the fault is active

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.