VOLVO
ECM-P061E87 - Collision Mitigation By Braking. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
When there is a collision risk, the engine control module provides brake support using signals from the forward sensing module (FSM). The fault is set when the central electronic module (CEM) does not allow the engine torque to be lowered. The code is set first in the CEM or FSM and then in the engine control module, and it can only be cleared once the root fault has been remedied.
Mögliche Ursachen
- Fault in the forward sensing module (FSM)
- Fault in the central electronic module (CEM)
Was Sie tun können
- 1There is no separate fault tracing for this code. Start by tracing the control module where the fault was first registered, either the FSM or the CEM
- 2The code can only be cleared once the root fault is remedied and its own code is cleared, so deal with the root fault first
- 3If you have a diagnostic tool: read the fault status in the FSM and the CEM and see which one is active
- 4If the fault remains after the repair: have a workshop handle the fault tracing in the CEM and FSM
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.