Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P062700
    VOLVO

    ECM-P062700 - Fuel Pump A Control Circuit / Open. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    10 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (35)
    • Volvo S60 (2011–)2011–2012Nur Motor: B5254T5, B6304T4
    • Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
    • Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
    • Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010Nur Motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2011Nur Motor: B5254T10, B5254T11, B5254T8, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2012Nur Motor: B5254T10, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5, D5204T3, D5244T15
    • Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
    • Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
    • Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
    • Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
    • Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008Nur Motor: B5254T6
    • Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010Nur Motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2011Nur Motor: B5254T10, B5254T11, B6304T4, B6324S5
    • Volvo V70 (2008–)2012Nur Motor: B5254T10, B6304T4, B6324S5
    • Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
    • Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5
    • Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4
    • Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
    • Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5
    • Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5

    Was bedeutet der Fehlercode?

    The engine control module controls the fuel pressure through the fuel pump control module (PEM) using a pulse width modulated (PWM) signal, and the pump runs at the pressure the engine control module requests. The fault code is set when the PWM signal between the engine control module and the fuel pump control module is missing. The code can be caused by the wiring, the fuel pump control module, or a fault logged by the central electronic module (CEM).

    Mögliche Ursachen

    • Short circuit to supply voltage in the signal wire
    • Damaged fuel pump control module
    • A fault logged by the central electronic module (CEM)
    • Open circuit in the signal wire

    Was Sie tun können

    1. 1With the ignition off, check the connector at the fuel pump control module for contact resistance and oxidation
    2. 2With the ignition off and using a multimeter, check that the signal wire has no break, no contact with ground and no contact with supply voltage
    3. 3Check whether the CEM has stored fault codes for the fuel pump or the fuel pump relay, and trace those first
    4. 4If you have a diagnostic tool: read the fuel pump load in live data with the engine warm at idle and see whether the value looks reasonable
    5. 5If the fault remains: have a workshop check the fuel pump control module, since it may be faulty

    Symptome, die Sie bemerken können4

    • Cranking works, but the engine does not start
    • The engine stalls while driving, sometimes or all the time
    • The engine does not start, sometimes or all the time
    • The check engine lamp lights or behaves abnormally

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.