VOLVO
ECM-P062B04 - Internal Control Module Fuel Injector Control Performance. General Failure Information. System Internal Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module checks the injector circuit while the injection is taking place. The fault code is set when the module detects a fault in the signal to the injectors, which can be caused by a short circuit in the circuit or by a damaged control module.
Mögliche Ursachen
- Damaged engine control module (ECM)
- Short circuit in the circuit for the injectors
Was Sie tun können
- 1If you have a diagnostic tool: run the built-in self-test for this code and check that the fault is inactive afterwards
- 2With a multimeter, check that the wires to the injectors are not short-circuited
- 3If the fault remains: have a workshop check or replace the engine control module
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.