VOLVO
ECM-P062B16 - Internal Control Module Fuel Injector Control Performance. General Electrical Failures. Circuit voltage below threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module runs a self-test of a function that shuts the engine off automatically. The fault code is set when the module detects that this shut-off function is faulty. The fault can show up as hesitation, poor performance or a warning lamp that behaves abnormally.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1With the ignition on, wait a moment and read the status of the fault code with a diagnostic tool
- 2After the test, the fault should no longer be active
- 3Check that the fuses are intact
- 4If the fault remains: have a workshop replace the engine control module
Symptome, die Sie bemerken können4
- The check engine lamp lights or behaves abnormally
- The engine lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs jerkily, sometimes or all the time
- Text message and warning symbol in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.