VOLVO
ECM-P062B17 - Internal Control Module Fuel Injector Control Performance. General Electrical Failures. Circuit voltage above threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
Although the fault code is named for an overvoltage, the condition is the self-test of the automatic engine shut-off function. The fault code is set when the control module detects that the function is faulty, and the fault can show up as poor performance, hesitation or a warning lamp that behaves abnormally.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1With the ignition on, wait a moment and read the code's status
- 2After the test, the fault should no longer be active
- 3Check that the fuses are intact
- 4If the fault remains: have a workshop replace the engine control module
Symptome, die Sie bemerken können4
- The check engine lamp lights or behaves abnormally
- The engine lacks power, even when pulling away from standstill
- The engine surges or hesitates, especially during acceleration or deceleration
- Text message and warning symbol in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.