VOLVO
ECM-P062B64 - Internal Control Module Fuel Injector Control Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module supplies voltage to the injectors through two integrated high-performance end stages, and that voltage is well above the battery voltage. The control module checks the signal as injection takes place. The fault code is set when it detects an incorrect signal in the injector circuit, for example from a short circuit.
Mögliche Ursachen
- Damaged engine control module (ECM)
- Short circuit in the circuit for the injectors
Was Sie tun können
- 1With a diagnostic tool: have the control module run its built-in test for this code and read the result
- 2Look for injector wires that may have been short-circuited to each other
- 3Check that the fuses for the engine control are intact
- 4If the fault remains: have a workshop decide whether the engine control module needs replacing
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.