VOLVO
ECM-P062B84 - Internal Control Module Fuel Injector Control Performance. Bus Signal / Message Failures. Signal below allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module monitors the exhaust gas temperature. The fault code is set when the engine control module detects that the signal is faulty, and in this case the signal is below the permitted range. The code is linked to ECM-P062B85, which concerns the signal above the permitted range.
Mögliche Ursachen
- The same signal fault as ECM-P062B85 refers to
- Damaged temperature sensor
- Contact resistance or oxidation in connections
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition off, check the connectors at the temperature sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the status of the code after the repair and see whether it has cleared
- 4Have a workshop check the temperature sensor and its wiring if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.