VOLVO
ECM-P062B85 - Internal Control Module Fuel Injector Control Performance. Bus Signal / Message Failures. Signal above allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module monitors the exhaust gas temperature and detects a signal that is faulty, in this case above the permitted range. The code is linked to ECM-P062B84, which concerns the signal below the permitted range. The fault can be due to a damaged temperature sensor or poor contact at the sensor.
Mögliche Ursachen
- Damaged temperature sensor
- Contact resistance or oxidation in the connections
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Check the connector at the temperature sensor for looseness, oxidation and contact resistance
- 3If you have a diagnostic tool: read the exhaust temperature in live data with the engine cold and then warm, and see whether it changes smoothly
- 4Have a workshop check the temperature sensor and its wiring if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.