VOLVO
ECM-P062D00 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The control module keeps watch over the fuel injection system, including the integrated end stages for the injectors and their injection volume. The fault code is set when an error occurs in the internal voltage conversion of the module or when the injection time is wrong. The fault can make the engine hard to start or cause hesitation.
Mögliche Ursachen
- A fault inside the engine control module (ECM)
- Loose connections, or contact resistance and oxidation in the terminals
- Open circuit in the signal wire (+) or in the signal wire (-)
- Damaged injector
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition on, check the connectors at the injectors for looseness, contact resistance and oxidation
- 3With a multimeter, check that the signal wires to the injectors have no break
- 4If you have a diagnostic tool: read the fault status after the repair and see whether it has cleared when the test is complete
- 5If the fault remains: have a workshop check the injectors and the engine control module with diagnostic equipment
Symptome, die Sie bemerken können5
- Text message and warning symbol in the display
- The engine does not start, but the starter motor turns
- The engine is hard to start and the starter motor cranks slowly, especially on a cold start
- The engine lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs jerkily during acceleration, deceleration or steady speed, sometimes or all the time
Was der Fehler beeinflussen kann1
- Engine speed may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.