VOLVO
ECM-P062D01 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. General electrical failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (28)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2013Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Nur Motor: B4164T, B4164T2, B4204T11, B4204T12, B4204T15, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T, B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Nur Motor: B4164T, B4164T3, B4164T4, B4204T11
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4164T, B4204T11
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2013Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Nur Motor: B4164T, B4164T2, B4204T11, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2, B4204T11
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Nur Motor: B4204T7
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
Was bedeutet der Fehlercode?
The engine control module checks the current signal to the injectors. The fault code is set when the current signal is too low compared with what has been requested. Although the fault code is named as a general electrical fault, the condition concerns the current signal to the injectors, which can be weakened by poor contact at the injectors or by a damaged control module.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Damaged engine control module (ECM)
- Internal fault in the control module
Was Sie tun können
- 1With the ignition off, check the connectors at the injectors for contact resistance and oxidation
- 2Have a workshop measure the internal resistance of the injectors to rule out a damaged injector
- 3If the fault remains: have a workshop with diagnostic equipment check the engine control module
Symptome, die Sie bemerken können3
- The engine does not start, sometimes or all the time
- The engine is hard to start and the starter motor cranks slowly, sometimes or all the time
- The check engine lamp lights or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.