VOLVO
ECM-P062D04 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. System Internal Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Nur Motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module has built-in control systems that detect internal faults. If the monitoring registers a temporary fault in the injectors' control system, the fault code is set, and with an active fault the fuel supply is shut off. The fault can cause the engine not to start or to lack power.
Mögliche Ursachen
- Signal interference
- System voltage too low
- Damaged injection valves
- Software error
- Communication problems
- Internal fault in the control module
Was Sie tun können
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3After the test, see whether the fault is still present
- 4Have a workshop check that the control module's software is up to date
- 5If the fault remains: have a workshop check the injection valves and the control module with diagnostic equipment
Symptome, die Sie bemerken können4
- The engine does not start, sometimes or all the time
- The engine lacks power
- The engine stalls on starting
- The check engine lamp lights or behaves abnormally
Was der Fehler beeinflussen kann1
- Fuel supply is shut off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.