VOLVO
ECM-P062D05 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. System Programming Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module has built-in control systems that detect internal faults. When the monitoring registers a temporary fault in the injectors' control system, the fault code is set, and with an active fault the fuel supply is shut off. The code relates to the programming of the control module and may be connected to its software.
Mögliche Ursachen
- Signal interference
- Damaged injection valves
- Software error
- Fault codes stored at the same time: ECM-P062D06, ECM-P062D92 or ECM-P062D94
Was Sie tun können
- 1Have a workshop check whether the latest engine control software is loaded in the car
- 2Check that the fuses are intact
- 3If you have a diagnostic tool: read the code's status after the repair and see whether it is still active
- 4If the fault remains: have a workshop correct the programming or replace the control module
Symptome, die Sie bemerken können3
- The engine does not start, sometimes or all the time
- The engine lacks power, especially when pulling away from standstill
- The engine stalls on starting
Was der Fehler beeinflussen kann1
- The fuel supply is shut off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.