VOLVO
ECM-P062D06 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. Algorithm Based Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module has built-in control systems for detecting internal faults. The fault code is set when the monitoring registers a temporary fault in the injectors' control system, and fuel is shut off with an active fault. The fault lies in the control module's calculations and is linked to other injection fault codes.
Mögliche Ursachen
- Signal interference
- Damaged injection valves
- Software error
- Fault codes stored at the same time: ECM-P062D05, ECM-P062D92 or ECM-P062D94
Was Sie tun können
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check whether the fault is still active
- 3Check that the fuses are intact
- 4If the fault remains: have a workshop check the engine control and its software
Symptome, die Sie bemerken können3
- The engine does not start, sometimes or all the time
- The engine lacks power
- The starter motor does not turn over on starting, and a clicking sound may be heard
Was der Fehler beeinflussen kann1
- The fuel supply is shut off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.