VOLVO
ECM-P062D86 - Fuel Injector Driver Circuit Performance Bank 1. Bus Signal / Message Failures. Signal invalid
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The fault code concerns a signal that the control module judges to be invalid. The engine control module's own control systems have registered a temporary problem in the injector control, which causes the fault code to be set. Fuel supply may be shut off while the fault is active.
Mögliche Ursachen
- Communication problems
- Signal interference
- System voltage too low
- Damaged injection valves
- Software error
- Fault codes stored at the same time: ECM-P062D49, ECM-P062D48 or ECM-P062D04
Was Sie tun können
- 1With the ignition on, read the diagnostic status and fault status and check whether the fault is still active
- 2Check that the fuses are intact
- 3If the fault remains: have a workshop check the communication between the control modules
- 4Have a workshop check the injection valves and the engine control software
Symptome, die Sie bemerken können4
- The engine does not start, sometimes or all the time
- The engine lacks power
- The engine stalls on starting
- The engine is cranked but does not start
Was der Fehler beeinflussen kann1
- Fuel supply is shut off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.