VOLVO
ECM-P062D94 - Fuel Injector Driver Circuit Performance Bank 1. Component Failures. Unexpected operation
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module monitors the injector control with built-in control systems. The fault code is set when the internal monitoring functions detect a temporary problem in the injector control, and the unexpected behaviour in the injector control gives the fault.
Mögliche Ursachen
- Fault codes stored at the same time: ECM-P062D06 or ECM-P062D92
- Signal interference
- Damaged injection valves
- Software error
Was Sie tun können
- 1With the ignition on, read the diagnostic status and fault status for the code and check whether it is active
- 2Check that the fuses are intact
- 3Have a workshop check the injection valves, since they are among the possible causes of the fault
- 4Remedy the root fault and see whether the code returns
Symptome, die Sie bemerken können4
- The engine does not start, sometimes or all the time
- The engine lacks power, especially when pulling away from standstill
- The engine stalls on starting
- The starter motor cranks but the engine does not start
Was der Fehler beeinflussen kann1
- Fuel supply is shut off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.