Was bedeutet der Fehlercode ECM-P063000?

Diagnose und Fehlercodedefinition für ECM-P063000 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P063000 - VIN Not Programmed or Incompatible - ECM/PCM. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

The code means the VIN is not programmed or does not match the vehicle. The engine control module (ECM) receives the vehicle configuration from the central electronic module (CEM) and compares it with what is stored in the ECM. The code is set when the configuration from the CEM is incorrect or does not match the stored one. The check starts when the ignition is switched on.

Mögliche Ursachen

A control module from another vehicle has been fitted
Faulty software
A fault in the central electronic module (CEM), which should be traced

Was Sie tun können

1Read the code, clear it and road test the car to see whether it returns
2Check whether a control module from another vehicle has been fitted, for example after a replacement, since the code is then set
3Trace faults in the central electronic module (CEM) and check for other stored codes, as it sends the configuration to the engine control module
4Have a workshop compare the configuration in the engine control module with the central electronic module and correct the programming if it does not match

Symptome, die Sie bemerken können1

Warning symbol and text message in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.