VOLVO
ECM-P064C09 - Glow Plug Control Module 1. General Failure Information. Component Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The code concerns glow plug control module 1, which the ECM uses to control the glow plugs. It is set when the signal is missing or incorrect, and it belongs to the component failures.
Mögliche Ursachen
- Damaged fuse
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Damaged glow plug control unit
Was Sie tun können
- 1Check that the fuse is intact
- 2Check the connectors at the glow plug control unit for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to the glow plug control unit has no open circuit
- 4If you have diagnostic equipment, activate the glowing with the tool and check that it switches on
- 5If the fuse and wiring are intact but the fault remains, have a workshop check the glow plug control unit
Symptome, die Sie bemerken können2
- The engine is hard to start, sometimes or all the time, and cranks slowly at start-up
- The engine is hard to start on a cold start
Was der Fehler beeinflussen kann1
- Glowing is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.