VOLVO
ECM-P065300 - Sensor Reference Voltage B Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (29)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5, D4162T
- Volvo S60 (2011–)2013Nur Motor: D4162T
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B5254T6, D4204T
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Nur Motor: B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10, D4162T
- Volvo S80 (2007–)2013Nur Motor: D4162T
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4162T
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4162T
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2013Nur Motor: D4162T
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo V70 (2008–)2008Nur Motor: B5254T6, D4204T
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Nur Motor: B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10, D4162T
- Volvo V70 (2008–)2013Nur Motor: D4162T
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4162T
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
Was bedeutet der Fehlercode?
Reference voltage B to the sensors is excessive. The ECM examines the internal supply circuits to the components, and the code is set when the voltage in one of them is wrong. The cause may be in the wiring or a sensor, but also in the battery, the charging system or the engine control module.
Mögliche Ursachen
- Voltage cable to the sensor shorted to ground or supply voltage
- Damaged sensor
- Damaged engine control module (ECM)
- Fault in the charging system or a damaged battery
Was Sie tun können
- 1Read the fault codes and deal with any stored sensor codes first; they should clear once this code is dealt with
- 2Check the battery condition and that the charging system works
- 3Check that the relevant fuses are intact and that the connectors to the sensors are secure
- 4Use a multimeter to check that the wires to the sensors are not shorted to ground or supply voltage
- 5Clear the fault codes after the repair, road test the car, and have a workshop check the engine control module if the fault returns
Symptome, die Sie bemerken können5
- The car performs poorly and lacks power
- The starter motor does not turn, or turns without the engine starting
- The engine misfires or is hard to start
- Uneven idle
- Warning symbol and text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.