VOLVO
ECM-P065A07 - Generator System Performance. General Failure Information. Mechanical Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010Nur Motor: B4204T6, D4164T
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010Nur Motor: B4204T6, D4164T
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code concerns mechanical faults in the generator system, and it is set when the engine control module (ECM) receives fault information from the alternator control module (ACM) or the communication between the two is faulty. The check can be carried out with the engine running.
Mögliche Ursachen
- Damaged auxiliary drive belt and belt tensioner
- Damaged freewheel
- Related fault code ECM-P065A01; trace it according to that code
- Related fault code ECM-P0A3B00; ambient temperature too high
- Related fault code ECM-P163287; open circuit in the signal wire
Was Sie tun können
- 1With the ignition off, check the auxiliary drive belt and the belt tensioner for damage
- 2Have a workshop check that the alternator freewheel works
- 3Check that the fuses are intact and that the connectors in the charging system are secure
- 4If you have diagnostic equipment, read the alternator's charging current in live data with the engine running
Symptome, die Sie bemerken können3
- The battery is dead
- The battery has low voltage
- The charging warning light comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.