VOLVO
ECM-P066200 - Intake Manifold Tuning Valve Control Circuit High - Bank 1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo S80 (2007–)2007–2009Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2010Nur Motor: B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Nur Motor: B6324S4, B6324S5
- Volvo V70 (2008–)2008–2009Nur Motor: B6324S
- Volvo V70 (2008–)2010Nur Motor: B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Nur Motor: B6324S5
- Volvo XC60 (2009–)2010Nur Motor: B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6324S4, B6324S5
- Volvo XC70 (2008–)2008–2009Nur Motor: B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6324S4, B6324S5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
On bank 1 the ECM sets the dampers in the variable intake system (VIS) through the control valve for their vacuum motor. The code is set when the control signal is too high.
Mögliche Ursachen
- Signal wire shorted to supply voltage
- Damaged control valve
- Damaged damper actuator
Was Sie tun können
- 1Check that the fuses are intact and that the relevant functions of the car work, using the buttons, controls or a test drive
- 2If you have diagnostic equipment, activate the variable intake control valve and listen for a clicking sound from the valve
- 3With the ignition off, use a multimeter to check that the signal wire to the control valve is not shorted to supply voltage
- 4If the signal wire is intact but the fault remains, have a workshop check the control valve and the damper
Symptome, die Sie bemerken können3
- The malfunction indicator lamp lights up
- The car performs poorly and lacks power, especially at take-off
- The engine hesitates or surges during acceleration, during deceleration or at steady speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.