Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P066A00
    VOLVO

    ECM-P066A00 - Cylinder 1 Glow Plug Control Circuit Low. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    8 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
    • Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
    • Volvo V40 (2013–)2015Nur Motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
    • Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
    • Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5

    Was bedeutet der Fehlercode?

    The code concerns the glow plug in cylinder 1 and the control circuit for it. The ECM controls the glow plugs through the glow plug control module and sets the code when it detects a fault on glow plug 1.

    Mögliche Ursachen

    • Poor contact or oxidation in the connectors
    • Signal wire shorted to ground
    • Damaged glow plug control unit

    Was Sie tun können

    1. 1Check that the fuses are intact and that the relevant functions work, using the buttons, controls or a test drive
    2. 2With the ignition off, check the connectors to the glow plug control module and to the glow plug for contact resistance and oxidation
    3. 3Use a multimeter to check that the signal wire to the glow plug is not shorted to ground
    4. 4If the connectors and wire are intact but the fault remains, have a workshop check the glow plug and the glow plug control module

    Symptome, die Sie bemerken können3

    • The engine is hard to start and cranks slowly, at times or all the time
    • The engine is hard to start and cranks slowly after use
    • The engine is hard to start and cranks slowly on a cold start

    Was der Fehler beeinflussen kann1

    • Glowing is shut off for the damaged glow plug

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.