VOLVO
ECM-P066C00 - Cylinder 2 Glow Plug Control Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
This code is about glow plug 2 in cylinder 2. The ECM drives the glow plugs through a glow plug control module, and a fault on glow plug 2 causes the code to be set. The signal is too low.
Mögliche Ursachen
- Poor contact or oxidation in the connectors
- Signal wire shorted to ground
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition off, check the connectors at the glow plug control module and at glow plug 2 for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to glow plug 2 is not shorted to ground
- 4If the connectors and wire are intact but the fault remains, have a workshop check glow plug 2 and the glow plug control module
Symptome, die Sie bemerken können3
- The engine is hard to start and cranks slowly, at times or all the time
- The engine is hard to start and cranks slowly after use
- The engine is hard to start and cranks slowly on a cold start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.