VOLVO
ECM-P066F00 - Cylinder 3 Glow Plug Control Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (43)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4162T
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
The control circuit of the glow plug in cylinder 3 gives a signal that is too high. The ECM controls the glow plugs through the glow plug control module, and the code is set when that module finds a fault on glow plug 3.
Mögliche Ursachen
- Poor contact or oxidation at the connector contacts
- Open circuit in the signal wire
- Damaged glow plug control unit
- Glow plug 3 is short-circuited to supply voltage
Was Sie tun können
- 1Check that the fuses are intact
- 2With the ignition off, check the connectors at glow plug 3 and at the glow plug control module for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to glow plug 3 has no open circuit and is not shorted to supply voltage
- 4Have a workshop check glow plug 3 and the glow plug control module if the connectors and wire are intact
Symptome, die Sie bemerken können3
- The engine is hard to start and cranks slowly, at times or all the time
- The engine is hard to start and cranks slowly after use
- The engine is hard to start and cranks slowly on a cold start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.