VOLVO
ECM-P069212 - Fan 1 Control Circuit High. General Electrical Failures. Circuit short to battery
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (22)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module has detected a fault on the signal wire to the cooling fan control module, and the signal is short-circuited to voltage. The electric cooling fan may then not be controlled as intended. Related codes for the same fan circuit are ECM-P069211, ECM-P069213 and ECM-P069219.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Damaged cooling fan control module
- Loose connection, contact resistance or oxidation in the connections
- Damaged engine control module
Was Sie tun können
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check the fuse for the electric cooling fan in the owner's manual
- 3Look at the signal wire to the cooling fan control module for chafing and pinch damage, especially where it may have touched positive
- 4Use a multimeter to check that the signal wire has no contact with voltage, with the connectors disconnected
- 5Check the connectors at the cooling fan control module: are they secure and clean, without play?
- 6If the fault remains, have a workshop check the cooling fan control module and the engine control module
Symptome, die Sie bemerken können2
- Electric cooling fan does not work
- Engine may overheat or run hotter than normal
Was der Fehler beeinflussen kann1
- Electric cooling fan is activated at a predefined speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.