VOLVO
ECM-P069922 - Sensor Reference Voltage C Circuit High. General Signal Failures. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The control module monitors the supply voltage to some of the engine's sensors. The code is set when that voltage is too low or too high, and the other fuel system fault codes should be dealt with first.
Mögliche Ursachen
- Fault-trace according to the other fault codes for the fuel system
Was Sie tun können
- 1Read and clear the fault code and check whether it returns
- 2First correct the other fuel system fault codes, then read the fault code again
- 3Check whether the fault is still active with the ignition on
- 4If the fault remains after these checks, have a workshop check the control module's signals to the sensors
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.