Was bedeutet der Fehlercode ECM-P06C600?

Diagnose und Fehlercodedefinition für ECM-P06C600 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P06C600 - Cylinder 2 Glow Plug Incorrect. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The control module has registered a fault on glow plug 2. The glow plug helps the engine start when cold, so a fault makes starting harder. The code is general and does not say what type of fault it is.

Mögliche Ursachen

Short circuit in the signal wire between the glow plug relay and the glow plug
Damaged glow plug
Voltage from the glow control unit is too low

Was Sie tun können

1Read and clear the fault code. Then start the engine cold to see whether the fault returns
2Check the glow system fuses in the owner's manual
3Look at the connector on glow plug 2 and the wire toward the glow relay for loose contacts, oxidation and chafing
4If you have a diagnostic tool, activate glowing and check whether glow plug 2 is included in live data
5Use a multimeter to check that the wire to glow plug 2 has no contact with ground (the body), with the connectors disconnected
6If the fault remains, have a workshop check the glow plug and the glow control unit

Symptome, die Sie bemerken können3

Engine hard to start and cranks slowly
Problem noticed after use
Problem noticed at cold start

Was der Fehler beeinflussen kann1

Glowing is switched off for the damaged glow plug

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.