VOLVO
ECM-P06DA00 - Engine Oil Pressure Control Circuit/Open. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
Was bedeutet der Fehlercode?
The module drives engine oil pressure through the oil pump actuator and monitors it electrically. The code concerns an open circuit to the actuator, and it is set when the control module detects an electrical fault on the actuator or a fault in the wire.
Mögliche Ursachen
- Open circuit on the signal wire
- The oil pump is defective or worn
Was Sie tun können
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check the fuses for the oil pump control in the owner's manual
- 3Look at the connector at the oil pump actuator and the wire for loose contacts, oxidation and chafing
- 4Use a multimeter to check that the signal wire is intact between the connectors, with the connectors disconnected
- 5If the fault remains, have a workshop check the oil pump actuator and the oil pump
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.