VOLVO
ECM-P070000 - Transmission Control System (MIL Request). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007–2008
- Volvo S80 (2007–)2009Alle Motoren außer: D5244T10
- Volvo S80 (2007–)2010Alle Motoren außer: B4204T6, B6324S, B8444S, D4164T, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, B6304T4, B6324S4
- Volvo S80 (2007–)2012Nur Motor: B5254T10, B6304T4, B6324S4
- Volvo S80 (2007–)2013–2015Nur Motor: B6304T4, B6324S4
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008
- Volvo V70 (2008–)2009Alle Motoren außer: D5244T10
- Volvo V70 (2008–)2010Alle Motoren außer: B4204T6, B6324S, D4164T, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B6304T4
- Volvo V70 (2008–)2012Nur Motor: B5254T10, B6304T4
- Volvo V70 (2008–)2013–2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4, B6324S4
- Volvo XC70 (2008–)2008–2009
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S4
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The code only shows that one or more fault codes are stored in the transmission control module (TCM) that affect emissions. The engine control module lights the malfunction indicator lamp when the transmission control module requests it.
Mögliche Ursachen
- Look for the fault cause in the transmission control module (TCM)
- One or several fault codes are stored in the transmission control module (TCM)
Was Sie tun können
- 1If you have a diagnostic tool, read the fault codes in the transmission control module first, since this code only shows that they exist
- 2Clear this code once the other fault codes have been dealt with, and check whether the MIL goes out
- 3If the fault remains after these checks, have a workshop read and correct the faults in the transmission control module
Symptome, die Sie bemerken können3
- Message in the display
- Malfunction indicator lamp (MIL) is lit
- Check engine light comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.