VOLVO
ECM-P070148 - Transmission Control System Range/Performance. System Internal Failures. Supervision software failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code indicates a fault in the supervision software of the engine control module. It is set when the engine control module receives information about a fault in the transmission control module (TCM).
Mögliche Ursachen
- Contact resistance, oxidation or open circuit in the connections
- Fault in the controller area network (CAN)
- Software fault in the control module
- Look for the fault cause in the transmission control module (TCM)
Was Sie tun können
- 1Read and clear the fault code, and test-drive with the ignition on and while driving to see whether it returns
- 2Look at the connectors and connections between the control modules for loose contacts, oxidation and chafing
- 3If you have a diagnostic tool, read the fault codes in the transmission control module (TCM) and correct them first
- 4If the fault remains after these checks, have a workshop check the CAN network and the software in the control module
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.