VOLVO
ECM-P070462 - Clutch Switch Input Circuit. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module compares the signals from the clutch pedal position sensor and the position switch. The code is set when the signal from the position sensor is incorrect, and the signals then do not agree with each other.
Mögliche Ursachen
- Look for the fault cause in the central electronic module (CEM)
Was Sie tun können
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Look at the connectors and wiring at the clutch pedal and the position switch for loose contacts and oxidation
- 3If the fault remains after these checks, have a workshop check the central electronic module (CEM) and the position sensor
Symptome, die Sie bemerken können3
- Cruise control cannot be engaged
- Autostart does not work
- Warning symbol and text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.