VOLVO
ECM-P080526 - Clutch Position Sensor Circuit. General Signal Failures. Signal rate of change below threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The engine control module checks how the clutch pedal moves using a position sensor and a position switch. The position sensor's signal arrives via the central electronic module (CEM) and over CAN. The code is set when the position sensor value does not add up, and fault-tracing then starts in the CEM.
Mögliche Ursachen
- Fault-trace the central electronic module (CEM)
Was Sie tun können
- 1Read and clear the fault code, and test-drive to see whether auto-start and cruise control work
- 2Look at the connectors at the clutch pedal and the position sensor for loose contacts, oxidation and chafing
- 3Check that the clutch pedal moves freely and does not stick
- 4If you have a diagnostic tool, read the clutch position in live data while you press and release the pedal
- 5If the fault remains, have a workshop read and correct the fault in the central electronic module (CEM)
Symptome, die Sie bemerken können2
- Auto-start does not happen
- Cruise control does not work at all
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.