VOLVO
ECM-P080529 - Clutch Position Sensor Circuit. General Signal Failures. Signal signal invalid
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The code is set when the clutch position sensor does not deliver any valid signal. The signal travels via the central electronic module (CEM) and over CAN to the engine control module, and fault-tracing starts there.
Mögliche Ursachen
- Look for the fault cause in the central electronic module (CEM)
Was Sie tun können
- 1Read and clear the fault code and test-drive to see whether it returns
- 2Check that the clutch pedal and its contact are firmly fitted and that the wiring is intact
- 3Look at the connectors at the clutch pedal for loose contacts and oxidation
- 4If the fault remains, have a workshop check the central electronic module (CEM) and the position sensor
Symptome, die Sie bemerken können2
- Auto-start does not work
- Cruise control does not function
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.