VOLVO
ECM-P080600 - Clutch Position Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the signals from the clutch pedal position sensor and position switch and checks that they are reasonable. The code is set when one of the two signals lies outside its permitted range. It does not say what type of fault it is, only that the signals do not agree.
Mögliche Ursachen
- Position switch incorrectly fitted, misadjusted or sticking
- Contact resistance, oxidation or loose connection in the connector
- Faulty position switch
Was Sie tun können
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try starting, auto-start and cruise control with the buttons and controls to see whether any of the symptoms can be reproduced
- 3Check that the clutch pedal moves freely and does not stick, and that the position sensor and position switch are firmly fixed and correctly adjusted
- 4Check that the connectors at the position sensor and position switch are firmly seated and free from oxidation and corrosion
- 5If you have a diagnostic tool, compare live data for the position sensor and switch as the pedal is pressed and released; they should agree
- 6Have a workshop carry out a more detailed check of the position sensor and position switch if these checks are not enough
Symptome, die Sie bemerken können2
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.