Was bedeutet der Fehlercode ECM-P080885?

Diagnose und Fehlercodedefinition für ECM-P080885 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P080885 - Clutch Position Sensor "A" Circuit High. Bus Signal / Message Failures. Signal above allowable range

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (12)

Was bedeutet der Fehlercode?

The engine control module (ECM) receives the clutch pedal position from the central electronic module (CEM) and checks that the value is reasonable. The code is set when the signal lies above the permitted range, which may be due to the position sensor, a signal wire shorted to voltage, or a fault in the CEM.

Mögliche Ursachen

Damaged clutch pedal position sensor
Signal wire shorted to voltage
The fault lies in the central electronic module (CEM)

Was Sie tun können

1Read the engine control module fault codes. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, investigate it first
2If ECM-U010482, ECM-P193582, ECM-P080582 or ECM-U042600 is stored, investigate it first, as it most likely leads to the root cause
3Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
4Use a multimeter to check that the wire from the sensor has no contact with positive or the supply voltage
5Check that the connectors at the position sensor are firmly seated and free from oxidation
6If the fault remains after these checks, have a workshop investigate the central electronic module (CEM), as the code points to a fault there

Symptome, die Sie bemerken können1

Starting and auto-start do not work

Was der Fehler beeinflussen kann1

The brake pedal must be depressed for auto-start

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.