VOLVO
ECM-P082182 - Gear Lever X Position Sensor Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The code concerns the gear lever X position sensor. The engine control module (ECM) continuously receives the gear selector position from the transmission control module (TCM) over the CAN network. The code is set when that message is missing or wrong, for example when the counter in the message is incorrect or is not updated.
Mögliche Ursachen
- Fault on the CAN network
- The root cause is in the transmission control module (TCM)
Was Sie tun können
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Read the fault codes in the transmission control module (TCM) first, as the root cause is there
- 3Read the fault codes in the engine control module and check for other CAN-related codes, as the fault may originate in the CAN network
- 4Try moving the gear selector through all positions and check that the car responds as normal
- 5If you have a diagnostic tool, check in live data that the gear selector position changes as you move the selector
- 6If the fault remains, have a workshop investigate the CAN network and the transmission control module (TCM)
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.