VOLVO
ECM-P083500 - Clutch Pedal Switch "B" Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (29)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Alle Motoren außer: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Alle Motoren außer: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2011Nur Motor: B4164T
- Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Alle Motoren außer: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle Motoren außer: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012Alle Motoren außer: B4204T7, B6304T4
- Volvo V60 (2011–)2013Alle Motoren außer: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
- Volvo V60 (2011–)2014Alle Motoren außer: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012Alle Motoren außer: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Alle Motoren außer: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle Motoren außer: B5204T9, B6304T4
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
Clutch pedal switch B detects the lower end of the pedal's travel, meaning when the pedal is pressed down, and is used to tell whether the pedal is depressed or released for automatic engine stop-start. The code is set when the switch stays active for a long time during driving with a certain gear engaged.
Mögliche Ursachen
- Contact resistance, oxidation or loose contact in the connector
- Damaged clutch pedal switch B
- Short circuit or break in the connections to the switch
- Damaged signal wire, or a short to voltage on it
- Position switch incorrectly fitted, misadjusted or sticking
- Faulty position switch
Was Sie tun können
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try automatic stop-start, starting, auto-start and cruise control with the buttons and controls to see whether they are affected
- 3Check that the clutch pedal moves freely, does not stick, and that the connectors at the pedal are firmly seated and free from oxidation
- 4Check that the wiring to switch B has no chafing, crush damage or loose clips, especially where the cable moves
- 5Use a multimeter to check that the wire from switch B has no contact with earth (the body) or positive, and that it has no break
- 6If you have a diagnostic tool, check in live data that switch B changes state as the pedal moves. If the fault remains, have a workshop check the connectors and position switch
Symptome, die Sie bemerken können4
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
Was der Fehler beeinflussen kann1
- The automatic engine stop-start function is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.