VOLVO
ECM-P083F00 - Clutch Pedal Switch A / B Correlation. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2008–2010Nur Motor: D4204T
- Volvo S80 (2007–)2011–2012, 2015Nur Motor: B6304T4
- Volvo S80 (2007–)2013–2014Nur Motor: B5254T12, B5254T14, B6304T4
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2010Nur Motor: D4204T
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4
- Volvo V70 (2008–)2013–2015Nur Motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2011–2014Nur Motor: B6304T4
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4
Was bedeutet der Fehlercode?
The ECM compares clutch pedal switches A and B with each other, and the code is set when the signals do not agree. On cars without an electronic parking brake, an extra position switch replaces the position sensor.
Mögliche Ursachen
- Damaged clutch pedal switch
- Loose contact
- Contact resistance or oxidation in connectors or connections
- Wires shorted to earth or to voltage
Was Sie tun können
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try starting, auto-start and cruise control with the buttons and controls to see whether they are affected
- 3Check that the clutch pedal moves freely and does not stick, and that the connectors at the pedal are firmly seated
- 4Check that the connectors are free from oxidation and contact resistance, and that the cables have not chafed or been pinched
- 5Use a multimeter to check that the wires to the connectors have no contact with earth (the body) or with positive
- 6If you have a diagnostic tool, check in live data that switches A and B change state as the pedal moves. If they do not, have a workshop investigate
Symptome, die Sie bemerken können2
- Starting and auto-start do not work
- Cruise control cannot be engaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.