VOLVO
ECM-P085000 - Park / Neutral Switch Input Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The ECM compares the park and neutral gear positions on the direct wire with the same positions received over CAN. The code is set when the two signals do not agree.
Mögliche Ursachen
- Signal wire shorted to earth or to voltage
- Break in the signal wire
- The root cause is in the transmission control module (TCM)
Was Sie tun können
- 1Read the fault codes in the transmission control module (TCM). If a fault code for the gear position is stored there, remedy it first
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Check the connector at the transmission control module (TCM) for contact resistance and oxidation
- 4Use a multimeter to check that the signal wire has no break and no contact with earth or voltage
- 5If the fault remains after these checks, have a workshop investigate the transmission control module (TCM)
Symptome, die Sie bemerken können1
- The starter motor does not engage the engine
Was der Fehler beeinflussen kann1
- The ECM uses the signal received over CAN instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.