Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P086D00
    VOLVO

    ECM-P086D00 - Neutral Position Sensor "A" Circuit High. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    11 Modelle

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (29)
    • Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
    • Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
    • Volvo S60 (2011–)2012Alle Motoren außer: B4204T7, B5254T5, B6304T4
    • Volvo S60 (2011–)2013–2014Alle Motoren außer: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2015Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2011Nur Motor: B4164T
    • Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S80 (2007–)2014Alle Motoren außer: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
    • Volvo V40 (2013–)2013–2014Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015Alle Motoren außer: B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T, D4162T, D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
    • Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
    • Volvo V60 (2011–)2012Alle Motoren außer: B4204T7, B6304T4
    • Volvo V60 (2011–)2013Alle Motoren außer: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
    • Volvo V60 (2011–)2014Alle Motoren außer: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
    • Volvo V60 (2011–)2015Alle Motoren außer: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
    • Volvo V70 (2008–)2011Nur Motor: B4164T
    • Volvo V70 (2008–)2012Alle Motoren außer: B4204T7, B5254T10, B6304T4, B6324S5
    • Volvo V70 (2008–)2013–2014Alle Motoren außer: B4204T7, B5204T9, B6304T4, B6324S5
    • Volvo V70 (2008–)2015Alle Motoren außer: B5204T9, B6304T4
    • Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2013–2014Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2012–2015Alle Motoren außer: B6304T4, B6324S4, B6324S5

    Was bedeutet der Fehlercode?

    The signal from the main sensor of neutral position sensor A is too high. The fault may be caused by the signal wire or the connector being shorted to voltage, or by a damaged sensor. The sensor has a redundancy sensor as a backup, and the fault is checked with the ignition on.

    Mögliche Ursachen

    • Loose contact or oxidation in the connector
    • Signal wire shorted to voltage
    • Damaged neutral position sensor
    • Connector shorted to voltage

    Was Sie tun können

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Check that the connector at the neutral position sensor is firmly seated and free from oxidation and looseness
    3. 3Use a multimeter to check that the signal wire has no contact with the battery positive and has no break
    4. 4Try automatic stop-start with the buttons and controls to see whether the function works
    5. 5If you have a diagnostic tool, check in live data that the sensor value changes when the gear lever is moved, instead of staying too high
    6. 6If the fault remains after these checks, have a workshop check the sensor and the wiring to it

    Symptome, die Sie bemerken können2

    • Automatic engine stop-start does not work while driving and at idle
    • Starting and auto-start do not work

    Was der Fehler beeinflussen kann1

    • The automatic engine stop-start function is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.