VOLVO
ECM-P08A800 - Clutch Pedal Position Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (30)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Alle Motoren außer: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013Alle Motoren außer: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Nur Motor: B4164T
- Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Nur Motor: B4164T, B4164T2, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle Motoren außer: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012Alle Motoren außer: B4204T7, B6304T4
- Volvo V60 (2011–)2013Alle Motoren außer: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
- Volvo V60 (2011–)2014Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012Alle Motoren außer: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013Alle Motoren außer: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Alle Motoren außer: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle Motoren außer: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the position sensor against the clutch pedal switch. The code indicates that the sensor signal is wrong, because the pedal position does not agree with the switch on some drives. If the driver's use of the clutch explains the fault, no repair is needed.
Mögliche Ursachen
- Contact resistance, oxidation or loose contact in the connector
- Damaged signal wire
- Damaged clutch pedal sensor, position sensor or pedal switch
- Many gear changes made without pressing the clutch pedal far enough
- Long driving with the clutch pedal held down
Was Sie tun können
- 1If the driver's use of the clutch explains the fault, no repair is needed
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Check that the connectors at the position sensor and pedal switch are firmly seated and free from oxidation and contact resistance
- 4Check that the clutch pedal moves freely and does not stick, and that the sensors are firmly fixed
- 5Use a multimeter to check that the signal wire from the sensor has no break and no contact with earth (the body)
- 6Have a workshop check that the engine control module has the latest software, as an improved version copes better with harder clutch use
Symptome, die Sie bemerken können5
- Starting and auto-start do not work
- Automatic engine stop-start does not work, both at idle and while driving
- The car may hesitate, surge or run jerkily while driving, even at constant speed
- A message and a warning symbol are shown in the display
- The check engine lamp lights or behaves abnormally
Was der Fehler beeinflussen kann1
- The automatic engine stop-start function is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.