Was bedeutet der Fehlercode ECM-P08AE00?

Diagnose und Fehlercodedefinition für ECM-P08AE00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P08AE00 - Neutral Position Sensor "B" Circuit Range/Performance. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

Neutral position sensor B measures the angle at which the gear lever turns the input shaft to the gearbox, and the engine control module uses it while automatic stop-start is active. The code is set when the character of the signal from the sensor is wrong.

Mögliche Ursachen

Damaged neutral position sensor B

Was Sie tun können

1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
2Check that the connector at neutral position sensor B is firmly seated and free from oxidation and looseness
3Check that the sensor is firmly fixed to the gearbox and is not damaged
4If you have a diagnostic tool, check in live data that the value for sensor B changes smoothly as the gear lever is moved between positions
5If the fault remains after these checks, have a workshop investigate neutral position sensor B

Symptome, die Sie bemerken können3

Automatic engine stop-start does not work while driving
Automatic engine stop-start does not work at idle
Starting and auto-start do not work

Was der Fehler beeinflussen kann1

The automatic engine stop-start function is switched off

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.