Was bedeutet der Fehlercode ECM-P0CE300?

Diagnose und Fehlercodedefinition für ECM-P0CE300 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P0CE300 - Hybrid/EV Battery Pack Coolant Control Valve "A" Control Circuit High. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The code indicates a control circuit for the battery cooling valve that is too high, but the condition is that the signal wire between the engine control module and the valve is shorted or has a break.

Mögliche Ursachen

Damaged valve
Short circuit or break in the wiring to the valve

Was Sie tun können

1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
2Switch the car off, restart it and read off the fault code again to see whether it returns
3Where possible, check on a test drive that the air conditioning and HYBRID drive mode work
4Have a workshop check the valve and its wiring. The hybrid system is a workshop task
5Do not measure or disconnect the hybrid system's wiring yourself

Symptome, die Sie bemerken können3

The combustion engine is active in HYBRID mode more often than normal, or all the time
Temperature control and air conditioning do not work
A message and a warning symbol are shown in the display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.