ECM-P110200
VOLVO
ECM-P110200 - Mass Air Flow Sensor In Range But Lower Than Expected. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The mass air flow sensor signal lies within its range but is lower than the engine control module expects. The module compares the signal with the sensor's characteristic, and the code is set when the signal is too low and does not follow it.
Mögliche Ursachen
- Air leak in the intake system
- Loose contact, contact resistance or oxidation in the connections
- Signal wire shorted to earth
- Break in the signal wire
- Break in the voltage supply
- Damaged mass air flow sensor
Was Sie tun können
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Check that the hoses and connections in the intake are sealed and that no air leak can be seen
- 3Check that the connector at the mass air flow sensor is firmly seated and free from looseness, contact resistance and oxidation
- 4Use a multimeter to check that the signal wire from the sensor has no break and no contact with earth (the body), and that the supply wire has no break
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the mass air flow sensor
Symptome, die Sie bemerken können1
- The check engine lamp lights or behaves abnormally
Was der Fehler beeinflussen kann1
- The engine control module calculates an air mass instead of using the sensor's value
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.