Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P113700
    VOLVO

    ECM-P113700 - Lack Of HO2S12 Switches - Sensor Indicates Lean. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    S80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
    • Volvo S80 (2007–)2008Nur Motor: B4204S3, B4204S4, B6324S
    • Volvo S80 (2007–)2009–2011Nur Motor: B4204S3, B4204S4
    • Volvo V70 (2008–)2008Nur Motor: B4204S3, B4204S4, B6324S
    • Volvo V70 (2008–)2009–2011Nur Motor: B4204S3, B4204S4
    • Volvo XC70 (2008–)2008Nur Motor: B6324S
    • Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
    • Volvo XC90 (2003–)2007Nur Motor: B6324S, B8444S
    • Volvo XC90 (2003–)2008Nur Motor: B6324S

    Was bedeutet der Fehlercode?

    The ECM continuously monitors the voltage of the rear oxygen sensor on bank 1, which is the cylinder row at the front with cylinders 1, 3, 5 and 7. The code is set when the voltage falls outside the range the ECM accepts, or when the sensor wrongly shows a lean mixture.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connections
    • Signal wire shorted to ground
    • Broken signal wire
    • Damaged rear oxygen sensor on bank 1
    • Air leak in the intake pipe

    Was Sie tun können

    1. 1If you have a diagnostic tool: start the engine, let it idle for a while, then read the fault status. Malfunction found means the fault is present now
    2. 2Do not use rust solvent spray or grease in the oxygen sensor connector, and check that it is firmly seated and free from oxidation
    3. 3Inspect the signal wire for chafing, and use a multimeter to check that it is unbroken and has no contact with ground
    4. 4Look for air leaks in the intake pipe, for example at hoses and connections
    5. 5If you find nothing above: try a new rear oxygen sensor, or have a workshop replace it

    Symptome, die Sie bemerken können1

    • Malfunction indicator (MIL) lamp is lit

    Was der Fehler beeinflussen kann1

    • Control of the rear oxygen sensor is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.