VOLVO
ECM-P114506 - Calculated Torque Error. General Failure Information. Algorithm Based Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) compares fuel consumption with the calculated torque. The code is set when fuel consumption is higher than calculated while torque is too low. The cause may be a leak in the fuel or intake system, or a damaged sensor.
Mögliche Ursachen
- Leak in the fuel system
- Leak in the air intake system
- Damaged boost pressure sensor
- Damaged engine speed (RPM) sensor
Was Sie tun können
- 1Check the fuel system for leaks, for example at hoses and connections
- 2Look for air leaks in the intake system at hoses and clamps
- 3Check that the boost pressure sensor connections are firmly seated and free from oxidation
- 4Check the engine speed sensor connections in the same way
- 5If you have a diagnostic tool: start the engine, vary the speed and compare boost pressure in live data with the calculated value
- 6If you find no fault: have a workshop check the boost pressure sensor and the engine speed sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.