VOLVO
ECM-P118754 - Variant Selection. System Programming Failures. Missing calibration
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
This code concerns variant selection, which means the engine control module (ECM) must be configured to match the car. It is set when the control module has no configuration data, or when the software that was downloaded does not match the car's configuration.
Mögliche Ursachen
- The ECM has not been programmed yet
- The control module software does not match what the car is configured for
Was Sie tun können
- 1Programming the control module is a workshop task, so have a workshop download the correct software for the car
- 2If the control module has recently been replaced, it needs programming for this car, or the code may return
- 3Clear the code after programming and check that it is not set again
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.