VOLVO
ECM-P120111 - Cylinder #1 Injector Circuit Open/Shorted. General Electrical Failures. Circuit short to ground
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (46)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007–2008Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo S80 (2007–)2010Nur Motor: D4164T, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D4164T, D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2008Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Nur Motor: D4164T, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D4164T, D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal to the injectors. The code is set when the signal to an injector is incorrect, because the signal wire is shorted to ground. The fault applies to the cylinder the code points to.
Mögliche Ursachen
- Short circuit between the signal wires
- The signal wire is shorted to ground
Was Sie tun können
- 1Read the code and note which cylinder the fourth digit refers to, so you check the right wire
- 2With the ignition on and the engine control module connector disconnected, use a multimeter to check that the wires to the relevant injector are not shorted to each other or to ground
- 3Inspect the signal wire for chafing and pinching, especially where it runs close to the body
- 4Check that the injector connectors are firmly seated and free from oxidation
- 5If you have a diagnostic tool: activate the injector and check that it operates
- 6If you find no fault in the wiring: have a workshop check the injectors
Symptome, die Sie bemerken können4
- The engine does not start, either occasionally or all the time
- The engine stalls on start
- Poor performance and lack of power while driving
- A clicking sound, or no sound at all, when starting is attempted
Was der Fehler beeinflussen kann1
- Injection stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.